LED Canopy Soffit Luminaire Gas Station Light – LED Canopy/Soffit Lighting

The Gas Station LED Canopy/Soffit Luminaire has an extremely thin profile constructed of rugged cast aluminum. It can be surface mounted easily from below the canopy deck and also has the ability to be pendant mounted or hook & cord mounted. Direct imaging of the LEDs is eliminated with a highly efficient patterned flat or 0.91″ (23mm) drop glass lens.

Applications: Gas Station, Petroleum canopies, CNG fueling stations, low-medium bay general lighting, soffits

 
1. Beam Angle(°): 120 degree
2. Two lens options are available: flat or 1-inch prismatic drop(to meet your optics needs)
3. Slim low profile design
4. Mounts: direct mount, hook & cord, pendant
5. Replace up to MIH 400W
6. Easy mounting and servicing from below the deck
7. Luminaire housing is constructed of rugged cast aluminum with integral heat sink specifically designed for LED
8. Direct mount is suitable for use in single or double skin canopies with a minimum 4.0″ (102mm) wide panels and a minimum 22 gauge, 0.030″ (0.7mm) canopy thickness
9. Direct mount luminaire mounts directly to the canopy deck with the drilling of a single 2.0″ (51mm) to 4.0″ (102mm) round hole, is secured in place with self-sealing screws that provide water-tight seal and includes 3/4″ (19mm) conduit entry for direct wire feed
10. Hook and cord mount includes a 3′ (0.91m) cord out of the fixture and is intended to hang from the single hook
11. High Quality & Ultra-Bright Osram LED Chips
12. MEANWELL Driver Listed
13. LM80 IES CE ROHS
14. 5 year WARRANTY

 

1. Beam Angle(°): 120 degree
2. Two lens options are available: flat or 1-inch prismatic drop(to meet your optics needs)
3. Slim low profile design
4. Mounts: direct mount, hook & cord, pendant
5. Replace up to MIH 400W
6. Easy mounting and servicing from below the deck
7. Luminaire housing is constructed of rugged cast aluminum with integral heat sink specifically designed for LED
8. Direct mount is suitable for use in single or double skin canopies with a minimum 4.0″ (102mm) wide panels and a minimum 22 gauge, 0.030″ (0.7mm) canopy thickness
9. Direct mount luminaire mounts directly to the canopy deck with the drilling of a single 2.0″ (51mm) to 4.0″ (102mm) round hole, is secured in place with self-sealing screws that provide water-tight seal and includes 3/4″ (19mm) conduit entry for direct wire feed
10. Hook and cord mount includes a 3′ (0.91m) cord out of the fixture and is intended to hang from the single hook
11. High Quality & Ultra-Bright Osram LED Chips
12. MEANWELL Driver Listed
13. LM80 IES CE ROHS
14. 5 year WARRANTY

สินค้าที่เกี่ยวข้อง